Polyaluminium Chloride (PAC) is an inorganic polymer coagulant. It is a yellow solid powder that is widely used in water treatments. PAC is better than other aluminum salts such as aluminium chloride, aluminium sulphate, and other various forms of Polyaluminium chlorisulfate and Polyaluminium chloride that they have lower charge than PAC.
These are 2 methods for polyalumunium chloride production or manufacturing process, the Gypsum process, and the Pressure process. The pressure process is widely used in Europe and Latin America. These are the following steps:
This process needs press cake as a raw material that containd aluminium metal, alumina chloride, alumina tryhidrate, and aluminium sulphate. The press cake mixes with concentrated hydrochloric acid that they are blended in an agitated tank. The press cake contains about 9% (w/w) aluminium and 12% (w/w) sulphate. The cake is solute in hydrochloric acid solution. The temperature of this reactor reach about 150oC and the pressure is high.
The first process is releasing hydrogen as a side product. It is an explosive and hazardous substance. The industry usually adds the aluminium hydroxide in the second process. The combination of aluminium hydroxide and hydrochloric acid produces aluminium chlorohydrate (ACH). This reaction determines the value of m and n in the Polyalumunium chloride molecules. This reaction happens at 500 kPa and 170oC.
Pressure and temperature of Polyalumunium chloride sink into the standard level. Stable PAC needs at least 9 weeks at 30o to precipitate. The presence of water during the process will be evaporated in the reactor that produces steam. Finally, Polyalumunium chloride contains more than 50% Al2O3.
Polyaluminium chloride is used in the treatment of drinking potable water and wastewater treatment. PAC is well known to be used as a flocculant for wastewater treatment. It can remove impurities such as heavy metal, organic matter, and colloidal particles. PAC has more advantages than other coagulant chemicals. For example, PAC reacts faster due to its high charge, they form bigger flocs so it is easy to filtrate, PAC is efficient to be used over a wide pH range, decreased cleaning frequency of the filters, reducing health problem, and it uses lower dosage than the other chemical coagulant.
Polyalumunium chloride is used for separating coal and water with excellent effect.
Polyalumunium chloride is used for oil and water separation.
Polyalumunium chloride is widely a raw material for deodorant manufacturing.
Polyaluminium chloride is widely used for setting dyes as a mordant, tanning the leather, fire retardant in textiles, coagulation agent for rubber latex, and in pulp and paper manufacture.